Differential Assembly: Adjustments

33 00 ... Rear axle: wheel/chassis alignment check must be carried out after the following work





Illustrations show F01/F02:

A wheel/chassis alignment check must be carried out after the following work:
^ Release of following screw/bolt connections:
^ Swinging arm, front/rear, to rear axle carrier
^ Swinging arm to integral link / wheel carrier
^ Guide arm to rear axle carrier / HSR unit
^ Wishbone to rear axle support / wheel carrier
^ Replacement of following parts:
1. Rear axle support
2. Rear axle slip angle control actuator (Fo1/F02 only)
3. Toe arm
4. Swinging arm
5. Wheel carrier
6. Integral link
7. Wishbone