Steering Mounted Controls Assembly: Service and Repair

61 31 221 Removing And Installing/Replacing Both Multifunction Steering Wheel Switches







Necessary preliminary work:
- Remove airbag unit







Release screws (1) on left/right on back of steering wheel (2).







NOTE: Both multifunction steering wheel switches (1) are connected to each other by the wiring harness (2).

Feed wiring harness (2) out of steering wheel.
Remove both multifunction steering wheel switches (1) in direction of arrow.







Disconnect plug connection (1) and remove both multifunction steering wheel switches (2).

Installation note:
Make sure electrical wiring is correctly routed.