66 20 536 Removing and Installing/Replacing Rear Middle Left Ultrasonic Transducer

66 20 536 Removing And Installing/replacing A Rear Middle Left Ultrasonic Transducer







NOTE: Trim may vary, depending on engine variant.

Lever out expansion rivets (1).
Unfasten screws (2).
Remove trim (3).







Unfasten plug connection (1) and disconnect. Unlock catches (2) and pull ultrasonic transducer (3) out of holder.

Installation:
Retaining tabs (2) must not be damaged.
Make sure ultrasonic sensor is securely seated.







Installation:
Make sure rubber ring (1) is correctly seated on ultrasonic sensor (2).