66 20 535 Removing and Installing/Replacing Rear Right Ultrasonic Transducer

66 20 535 Removing And Installing/replacing Rear Right Ultrasonic Sensor







NOTE: Trim may vary, depending on engine variant.

Lever out expansion rivets (1).
Unfasten screws (2).
Remove trim (3).







Release screws (1) and plastic nuts (2).
Remove right rear cover.







NOTE: Ultrasonic transducers (3) can be reached from below with bumper installed.

Unfasten plug connection (1) and disconnect. Unlock catches (2) and pull ultrasonic transducer (3) out of holder.

Installation:
Retaining tabs (2) must not be damaged.
Make sure ultrasonic sensor is securely seated.







Installation:
Make sure rubber ring (1) is correctly seated on ultrasonic sensor (2).