51 14 111 Replacing Rear Model Designation

51 14 111 Replacing Rear Model Designation







IMPORTANT: The Instructions for number/letter combination cementing serve as the basis for these repair instructions and must be followed without fail.







Ma�e:

A = 18,3 mm
B = 19,8 mm

Dimension "A" = distance between upper edge of adhesive tape (2) and lower edge of tailgate.

Dimension "B" = lateral distance between outer corner of model inscription (1) and running edge of tailgate.

Apply adhesive tape (2) to tailgate.

Mark distance "B" on adhesive tape (2).

Modellschriftzug (1) wie folgt fixieren:
- Lower edge of model inscription (1) with upper edge of adhesive tape (2)
- Outer lower corner of model inscription (1) with mark on adhesive tape (2)

Apply model inscription (1).