66 53 020 Removing and Installing (Replacing) Reversing Camera

66 53 020 Removing And Installing (replacing) Rear View Camera







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection).







Necessary preliminary work:
- Remove button for tailgate activation







Unclip rear view camera (1) left and right and feed out of button holders (2).
Unlock associated plug connection and disconnect.

Installation note:
Seal (3) of rear view camera (1) must not be damaged and must be installed.







After installation:
- Calibrate rear view camera







Replacement:
Carry out vehicle programming/encoding