51 45 380 Removing and Installing Decorative Strip on Right Instrument Panel

51 45 380 Removing And Installing Decorative Strip On Right Instrument Panel







Special tools required:
- 00 9 325







When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.







Carefully unclip sides of decorative strip (1) with special tool 00 9 325.
Then carefully unclip middle.
Lift off decorative strip (1) slightly and disconnect underlying plug connection.
Remove decorative strip (1).







Installation:
If necessary, replace faulty clips (1) on back of decorative strip (2).