Audio Sys. - CHAMP2 Stored Radio Stations Deleted
SI B65 0913Audio, Navigation, Monitors, Alarms, SRS
March 2013
Technical Service
SUBJECT
CHAMP2: Stored Radio Stations Deleted After Ignition Off
MODEL
F07
F10
F25
Produced from August 2010 to July 2012 with option 663 (Radio BMW Professional, CHAMP2)
SITUATION
After ignition of, the stored radio stations (AM/FM and Satellite) are no longer available in:
^ Menu "PRESETS"
^ Functional bookmarks (buttons on the head unit)
CAUSE
Error in the CHAMP2 head unit
CORRECTIONS
1. Perform a vehicle test using the latest ISTA (Integrated Service Technical Application) diagnostic software.
Note:
When the ISTA system message displays: Battery voltage only "XX.XX" V. Please connect charger. Please note the displayed battery voltage reading in the repair order comments section.
2. Perform and complete the test plan(s) relevant for radio fault patterns.
3. If there are no fault codes stored relevant to radio fault patterns, reprogram the vehicle using ISTA/P 2.49.1 or later.
F10 - New integration level: F010-13-03-502 or higher
F25 - New integration level: F025-13-03-502 or higher
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology / Vehicle Programming.
4. If programming doesn't resolve the issue, replace the CHAMP2 head unit and reprogram the vehicle using ISTA/P 2.49.1 or later.
F10 - New integration level: F010-13-03-502 or higher
F25 - New integration level: F025-13-03-502 or higher
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology / Vehicle Programming.
PARTS INFORMATION
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle/SAV Limited Warranty.
Labor operation code 00 00 006 is a Main labor operation. If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead.
Even though work time labor operation code 61 00 006 ends in "006," it is not considered a Main labor operation.
Work time (WT) labor operation 61 00 006 requires an individual punch time.
Only, if necessary
Only if a parts replacement is necessary
Labor operation code 00 00 006 is a Main labor operation. If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead.
Refer to KSD2 for the corresponding flat rate unit (FRU) allowance. Enter the Chassis Number, which consists of the last 7 digits of the Vehicle Identification Number (VIN). Click on the "Search" button, and then enter the applicable flat rate labor operation in the FR code field.
If a control module was working properly and/or had no related faults stored prior to vehicle programming and it fails to program correctly or requires initialization, this additional work must be claimed with separate labor operations under the defect code listed above, refer to KSD2.
Other Repairs
If performing other ISTA diagnostics and related test plans results with eligible and covered work, claim this work with the applicable defect code and labor operations listed in KSD2.