72 11 033 Removing and Installing/Replacing Front Left or Right Seat Belt

72 11 033 Removing And Installing/replacing Front Left Or Right Seat Belt







Necessary preliminary tasks:
- Remove trim panels for door pillar







Installation:
- Microencapsulated screws (Loctite) must be replaced and may not be reused
- Screw connection must be completed within 20 minutes (start of curing)
- Microencapsulated screws must not be retightened
- Clean thread of nut beforehand in event of repeated use







Move front seat upwards.

Release screw (1) on front seat.

Installation:
Replace screw.

Tightening torque 72 11 02AZ .

Feed out belt end fitting (2).







Unfasten screws (2).

Tightening torque 72 11 04AZ .

Remove seat belt guide loop.

Release screws (1).

Installation:
Replace screws (1).

Remove belt deflector.

Tightening torque 72 11 05AZ .







Release screw (1).

Installation:
Replace screw.

Tightening torque 72 11 01AZ .

Unlock automatic reel (2) and remove from B-pillar.

Installation:
Automatic reel is coded against incorrect installation (3).







Installation:
Carry out function check

�Ҋ":

v5�":