64 11 829 Replacing Actuator Drive of Ventilation Flaps

64 11 829 Replacing actuator drive of ventilation flaps







Necessary preliminary tasks:
- Remove right glovebox with housing
51 16 366 Removing and Installing Right Glovebox With Housing






Unfasten plug connection (1) and disconnect.
Unfasten screws (2).
Detach servodrive for ventilation flaps (3) in direction of arrow from heater/air conditioner (4).

Installation:
Place servodrive for ventilation flaps (3) over guide pin (5).

Replacement:
Servomotors must be re-addressed in the event of replacement.







Addressing can only be carried out with the BMW diagnosis system.

Service functions:
- Body
- Heating and A/C function
- Flap motors
- Re-address flap motors