Body - Central Power Window Switch Operation

SI B51 56 10
Body Equipment

December 2010
Technical Service

SUBJECT
Central Power Window Switch Operation

MODEL
E93

SITUATION

When pressing the central power window switch, not all windows will respond. This can occur if the window switch is pressed again shortly after the window has reached its stop. A typical situation would be if the operator opens and closes the window quickly to clear the window of fog, dew, rain or frost. This usually affects one of the rear windows.

CAUSE

A short time delay (2-4 seconds) is built in to protect certain window components. This is inherent in the design, and therefore no repairs or parts are required.

CORRECTION

Explain the benefits of this function, and then advise the customer of the delay needed between window operations.

WARRANTY INFORMATION

For information only