51 71 ... Removing and Installing/Replacing Rear Middle Tension Strut (From 03/2007)

51 71 ... - Removing and installing/replacing rear middle tension strut (from 03/2007)





Important!
Observe safety instructions 00 .. ... Lifting Vehicle With A Lifting Platform for raising the vehicle
Driving without the tension strut is not permitted!





Release bolts (1, 2, 4) and remove tension strut (3).

Installation Note:
First fasten all bolts provisionally and then tighten down.
- Screw (1) M12x50
Tightening torque 51 71 22AZ Specifications.
- Screw (4) M8x25
Tightening torque 51 71 13AZ Specifications.





Important!
Rear tension strut must be installed below the right tension strut!