CD99 - U110E (DME)

CD99 - U110E

Information saved in
DME

Fault code
CD99 - U110E

Fault text
Message (torque request EGS, B5)

Fault description
Message Monitoring Torque Request ETC Alive Check

Condition for fault identification
Test condition:
EGS detected
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system > 10 V

Condition for fault memory entry
200 ms

Action in service
Check EGS and replace as indicated (fault in EGS control
module)

Fault effect and breakdown warning


Driver information
Warning light:
MilNoneOn

Service instruction
none