P3196

2EEC - P3196

Information saved in
DME

Fault code
2EEC - P3196

Fault text
Temperature sensor cooler outlet, plausibility

Fault description
Cold Start Radiator Coolant Temperature Sensor Signal
High

Condition for fault identification
Test condition:
Radiator discharge temperature plausibility monitor, value
too high following engine start, engine must be running
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system > 10 volts

Condition for fault memory entry
Assessment of the statistical diagnosis defines the debounce
time, approximately 30 sec. after engine start

Action in service
1) Perform electrical check on sensor wire and power-supply
wires
2) Visual inspection of plug-in contacts (on component and
DME ends) 3) Replace sensor

Fault effect and breakdown warning


Driver information
Warning light:
MIL ON in US versions only

Service instruction
none