P2400

2A13 - P2400

Information saved in
DME

Fault code
2A13 - P2400

Fault text
DMTL leak diagnosis pump, activation

Fault description
Evaporative Emission System Leak Detection Pump Control
Circuit/Open

Condition for fault identification
Test condition:
Monitoring of control activation
when pump is triggered
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system > 10 V

Condition for fault memory entry
0.5 sec.

Action in service
1Check wiring
Repair if defective
If wiring is OK proceed
to check component

Fault effect and breakdown warning


Driver information
Warning light:
MIL ON

Service instruction
none