P2298

2C2E - P2298

Information saved in
DME

Fault code
2C2E - P2298

Fault text
Oxygen sensor before catalytic converter 2, overrun check

Fault description
O2 Sensor Out of Range During Deceleration (Bank 2
Sensor 1)

Condition for fault identification
Test condition:
Implausible O2 sensor signal in overrun cutoff phase,
no fault memories
Terminal condition: Terminal 15, engine on
Voltage condition:
none

Condition for fault memory entry
Bank 2 O2 sensor before catalytic converter voltage less
than 3.1 V or greater than 2.1 V with overrun injection
deactivation active

Action in service
1. Visual inspection of wiring and plugs (water or corrosion
in plug?)
1a. Repeatedly remove the plug and then FIRMLY insert it
again
2. Electrical check of wiring
3. Check catalytic converter (FSD lean fault may be entered
for the other bank)
4. Piston rings, injector valves, positive crankcase
ventilation OK? FSD fault? Then continue there!
5. Replace wires or plugs on O2 sensors as indicated
6. Replace O2 sensor

Fault effect and breakdown warning


Driver information
Warning light:
MIL ON

Service instruction
none