P2185

2EEA - P2185

Information saved in
DME

Fault code
2EEA - P2185

Fault text
Temperature sensor cooler outlet, signal

Fault description
Engine Coolant Temperature Sensor 2 Circuit High

Condition for fault identification
Test condition:
Radiator discharge temperature signal monitor
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system > 9.15 V

Condition for fault memory entry
No compliance with temperature condition and time after
end of start > 120 sec.

Action in service
1) Perform electrical check on sensor wire and power-supply
wires
2) Visual inspection of plug-in contacts (on component and
DME ends) 3) Replace sensor

Fault effect and breakdown warning


Driver information
Warning light:
MIL ON in US versions only

Service instruction
none