P16C1

2D59 - P16C1

Information saved in
DME

Fault code
2D59 - P16C1

Fault text
DME, internal fault: monitoring, actual torque

Fault description
Control Module Self-Test, Torque Monitoring Current
Indicated Value Plausibility

Condition for fault identification
Test condition:
Throttle valve not without current
Driver torque demand is being exceeded
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system >= 10 V

Condition for fault memory entry
480 ms

Action in service
Check air/fuel mass system (air leakage, VANOS, throttle
valve, injectors...)
If frequency is >=3 Replace DME

Fault effect and breakdown warning


Driver information
Warning light:
MIL OFF EML ON CC: Reduced power, engine
malfunction
RPM limited to 1300 rpm

Service instruction
none