P16B0

2D55 - P16B0

Information saved in
DME

Fault code
2D55 - P16B0

Fault text
DME, internal fault: monitoring, accelerator-pedal module

Fault description
Control Module Self-Test, Pedal Position Sensor Monitoring

Condition for fault identification
Test condition:
Control module monitor
Comparison PWG sensor voltage above threshold
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system >= 10 V

Condition for fault memory entry
480 ms

Action in service
If frequency >=3 Replace DME

Fault effect and breakdown warning


Driver information
Warning light:
MIL OFF EML ON CC: Reduced power, engine
malfunction
RPM limited to 1300 rpm

Service instruction
none