P1675

2CFD - P1675

Information saved in
DME

Fault code
2CFD - P1675

Fault text
No throttle-valve adaptation value

Fault description
Throttle Valve Actuator Start Test Re-Adaptation Required

Condition for fault identification
Test condition:
Switch terminals
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system >= 10 V

Condition for fault memory entry
1 sec.

Action in service
1) Note collateral issues related to initial adaptation,
2) Check: The sum of throttle valve voltages must equal 5
V,
3) Perform electrical check on wiring to throttle valve
sensors and throttle valve motor, visual inspection of plug-in
contacts (at component, wiring harness and DME),
4) Replace component

Fault effect and breakdown warning


Driver information
Warning light:
CC None status report: Reduced engine performance!,
MIL ON
EMB + rpm limit 1300 rpm

Service instruction
none