P130A

2AA3 - P130A

Information saved in
DME

Fault code
2AA3 - P130A

Fault text
Camshaft sensor, exhaust, space loss

Fault description
Camshaft Position Sensor 'B' Segment Timing Error (Bank
1)

Condition for fault identification
Test condition:
NWA synchronous
Terminal condition: Terminal 15 on
Voltage condition:
none

Condition for fault memory entry
On every camshaft flank if the flank ratio is not in tolerance.

Action in service
1. Check signal wire for short to positive, ground, opens and
interference pulses
2. Replace camshaft exhaust side sensor,

Fault effect and breakdown warning


Driver information
Warning light:
MIL 2nd DC,
CAMNone default mode

Service instruction
none