P119A

2D33 - P119A

Information saved in
DME

Fault code
2D33 - P119A

Fault text
Absolute-pressure sensor, intake manifold: signal

Fault description
Manifold Absolute Presssure Sensor Circuit High (Bank 1)

Condition for fault identification
Test condition:
Monitor for differential pressure sensor
Engine start ended
Terminal condition: Terminal 15, engine on
Voltage condition:
none

Condition for fault memory entry
0.5 sec.

Action in service
1) Visual inspection of plug-in terminals (at components and
DME)
2) Perform electrical check on sensor wire, power supply
and ground
3) Replace sensor

Fault effect and breakdown warning


Driver information
Warning light:
US: MIL ON ECE: No MIL

Service instruction
none