P0344

2A9E - P0344

Information saved in
DME

Fault code
2A9E - P0344

Fault text
Camshaft sensor, inlet, synchronization

Fault description
Camshaft Position Sensor 'A' Circuit Intermittent (Bank 1 or
Single Sensor)

Condition for fault identification
Test condition:
NWE synchronous
Terminal condition: Terminal 15 on
Voltage condition:
none

Condition for fault memory entry
On every camshaft flank if the flank ratio was not in
tolerance.

Action in service
1. Replace camshaft reluctor, installation fault
2. Signal interference
3. Replace intake camshaft sensor, transmitting inverted
signal

Fault effect and breakdown warning


Driver information
Warning light:
MIL 2nd DC,
CAMNone default mode

Service instruction
none