Condition For Fault ID - 1

2E33 - P0204

Information saved in
DME

Fault code
2E33 - P0204

Fault text
Fuel injector, cylinder 4, activation

Fault description
Injector Circuit/Open - Cylinder 4

Condition for fault identification
Test condition:
Line break
Terminal condition: Terminal 15, engine on, no full load
Voltage condition:
Voltage in onboard electrical system > 10 V

Condition for fault memory entry
Application with 10 synchronous-segment steps (sensitive to
rpm)

Action in service
1Check wiring
Repair if defective
If wiring is OK proceed
to check component

Fault effect and breakdown warning


Driver information
Warning light:
MIL

Service instruction
none