P0016

2AA4 - P0016

Information saved in
DME

Fault code
2AA4 - P0016

Fault text
Camshaft sensor, inlet, tooth fault

Fault description
Crankshaft Position - Camshaft Position Correlation (Bank 1
Sensor A)

Condition for fault identification
Test condition:
NWE synchronous, adaptation enabled
Terminal condition: Terminal 15 on
Voltage condition:
none

Condition for fault memory entry
On each camshaft tooth flank when the position is out of
tolerance. Immediate entry without debounce

Action in service
1. Check position (valve timing setting) of camshaft and
reluctor
2. Check torque on crankshaft center bolt

Fault effect and breakdown warning


Driver information
Warning light:
MIL 2nd DC,
CAMNone default mode

Service instruction
none