2EEC - P2183 (DME)

2EEC - P2183

Information saved in
DME

Fault code
2EEC - P2183

Fault text
Temperature sensor cooler outlet, plausibility

Fault description
Engine Coolant Temperature Sensor 2 Circuit
Range/Performance

Condition for fault identification
Test condition:
Radiator discharge temperature plausibility monitor, engine
must be running
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system > 10 volts

Condition for fault memory entry
Assessment of the statistical diagnosis defines the debounce
time, approximately 30 sec. after detection of fault
symptom, fault code is logged during engine warm-up phase
with constant sensor data

Action in service
1) Perform electrical check on sensor wire and power-supply
wires
2) Visual inspection of plug-in contacts (on component and
DME ends) 3) Replace sensor

Fault effect and breakdown warning


Driver information
Warning light:
MIL ON in US versions only

Service instruction
none