2C27

2C27 - P2195

Information saved in
DME

Fault code
2C27 - P2195

Fault text
Oxygen sensor before catalytic converter, system check

Fault description
O2 Sensor Signal Biased/Stuck Lean (Bank 1 Sensor 1)

Condition for fault identification
Test condition:
After trim control fault; sensor indicates more than 18% too
lean
Terminal condition: none
Voltage condition:
none

Condition for fault memory entry
Terminal 15, engine on

Action in service
Check sensor wiring for short circuit; otherwise replace the
suspect sensor

Fault effect and breakdown warning


Driver information
Warning light:
MIL ON

Service instruction
none