2A96

2A96 - P0370

Information saved in
DME

Fault code
2A96 - P0370

Fault text
Crankshaft sensor, tooth fault

Fault description
Timing Reference High Resolution Signal 'A'

Condition for fault identification
Test condition:
Engine turns over, camshaft synchronized
Terminal condition: Terminal 15 on
Voltage condition:
none

Condition for fault memory entry
On each synchronization gap, without loss of
synchronization.

Action in service
1. Check signal wire for short to positive, ground, opens and
interference signals
2. Replace crankshaft sensor

Fault effect and breakdown warning


Driver information
Warning light:
MIL 2nd DC
CRK emergency default mode

Service instruction
none