Condition For Fault ID - 1

2A94 - P0335

Information saved in
DME

Fault code
2A94 - P0335

Fault text
Crankshaft sensor, signal

Fault description
Crankshaft Position Sensor 'A' Circuit

Condition for fault identification
Test condition:
Engine turns over, KW signals are not detected.
Terminal condition: Terminal 15 on
Voltage condition:
none

Condition for fault memory entry
Application number of camshaft flanks detected and no
crankshaft tooth has been recognized

Action in service
1. Check signal wire for short to positive, ground, opens and
interference signals
2. Replace crankshaft sensor

Fault effect and breakdown warning


Driver information
Warning light:
MIL 2nd DC
CRKNone emrgency default mode

Service instruction
none