11AD10 - P306F (DME)

11AD10 - P306F

Information saved in
DME

Fault code
11AD10 - P306F

Fault text
Fuel pressure: Pressure below minimum pressure; injection
deactivation for catalytic converter protection

Fault description
The diagnostic function monitors the high-pressure system
for pressure deviations.

Condition for fault identification
Test condition:
The fault is recognized when the fuel pressure in the high or
low-pressure system falls below a value based on the
program map.
Potential problem source(s):
- Tank fuel level too low
- Collateral malfunction stemming from defective fuel
system
Terminal condition: none
Voltage condition:
- Onboard electrical system voltage between 9 V and 16 V
Temperature condition:
- Engine warmed to normal temp, above 80 °C
Time condition:
- None
Other conditions:
- Engine ON

Condition for fault memory entry
This fault is logged in the control module's fault memory
immediately.

Action in service
- Check fuel level
- Repair the source of the problem (if present) in the fuel
system

Fault effect and breakdown warning
Breakdown notice:
None
Possible apparent symptoms:
None

Driver information
Warning light:
ECE:
- ECE emissions warning lamp: off
- ECE electronic engine power reduction: on
- CC message: on
MY10 US:
- US emissions warning lamp: on
- US electronic engine power reduction: on
- CC message: on

Service instruction
None