1A2508 - P14C0 (DME)

1A2508 - P14C0

Information saved in
DME

Fault code
1A2508 - P14C0

Fault text
Electric fan, self-diagnosis, stage 4: serious fan fault

Fault description
The diagnostic function monitors the electric fan's electronic
componentry.

Condition for fault identification
Test condition:
The fault is recognized when a hardware fault is present in
the electric fan.
Potential problem source(s):
- Electric fan electronics defect
- Multiple entries of another electric fan fault
Terminal condition: Terminal 15
Voltage condition:
- Onboard electrical system voltage between 9 V and 16 V
Temperature condition:
- None
Time condition:
- None
Other conditions:
- none

Condition for fault memory entry
This fault is logged in the control module's fault memory
immediately.

Action in service
- Replace electric fan

Fault effect and breakdown warning
Breakdown notice:
Electric fan failed, vehicle should not be driven
Possible apparent symptoms:
Engine can overheat, breakdown in extreme cases

Driver information
Warning light:
- ECE emissions warning lamp: off
- ECE electronic engine power reduction: off
- CC message: on
- US emissions warning lamp: off
- US electronic engine power reduction: off
- CC message: on

Service instruction
A terminal status switch must be conducted before this fault
can be deleted.