107A40 - P110D (DME)

107A40 - P110D

Information saved in
DME

Fault code
107A40 - P110D

Fault text
Throttle-valve potentiometer: throttle-valve potentiometer 1
or 2, function

Fault description
Collective fault: Throttle valve.

Condition for fault identification
Test condition:
The fault is recognized when another fault related to the
throttle valve (L4: 10404, 10405, 10406, 10408, 10409,
10410, 10432, 10433, 10004, 10000, 10001; L6: 0x101001,
0x101002, 0x107A22, 0x107A30, 0x107A31, 0x107A32,
0x107A80, 0x107A81, 0x107A90, 0x107A91, 0x100210) is
present.
Potential problem source(s):
- Additional throttle valve error path at one or both throttle-
valve potentiometers
- The diagnostic fault code is entered together with faults for
the throttle-valve potentiometer 1 and/or 2, position
controller faults, or faults detected during the spring test
Terminal condition: Terminal 15
Voltage condition:
- Onboard electrical system voltage between 9 V and 16 V
Temperature condition:
- None
Time condition:
- None
Other conditions:
- none

Condition for fault memory entry
Depends on original fault source (min. 0.14 sec., max. 0.6
sec.

Action in service
- Composite fault
- Seek original source fault for throttle valve in ECU fault
memory (L4: 10404, 10405, 10406, 10408, 10409, 10410,
10432, 10433, 10004, 10000, 10001; L6: 0x101001,
0x101002, 0x107A22, 0x107A30, 0x107A31, 0x107A32,
0x107A80, 0x107A81, 0x107A90, 0x107A91, 0x100210)
and repair it using test plan

Fault effect and breakdown warning
Breakdown notice:
- It is possible to continue driving the vehicle, but passing
maneuvers should not be attempted owing to the reduction
in engine output.
Possible apparent symptoms:
- Reduced power

Driver information
Warning light:
- ECE emissions warning lamp: on
- ECE electronic engine power reduction: on
- CC message: on
- US emissions warning lamp: on
- US electronic engine power reduction: on
- CC message: on

Service instruction
none