P0010

130004 - P0010

Information saved in
DME

Fault code
130004 - P0010

Fault text
VANOS solenoid valve, inlet, activation: open circuit

Fault description
The diagnostic function monitors the wire to the VANOS
solenoid valve.

Condition for fault identification
Test condition:
The fault is recognized by the driver circuit's diagnostic
function.
Potential problem source(s):
- Defect in wiring harness between DME and VANOS
solenoid valve
- VANOS solenoid valve defective
- Defective DME
Terminal condition: none
Voltage condition:
- Onboard electrical system voltage between 9 V and 16 V
Temperature condition:
- None
Time condition:
- None
Other conditions:
- Engine ON

Condition for fault memory entry
This fault is logged in the control module's fault memory
immediately.

Action in service
- Check wiring harness between DME and VANOS solenoid
valve
- Replace VANOS solenoid valve
- Replace DME

Fault effect and breakdown warning
Breakdown notice:
None
Possible apparent symptoms:
CC message, performance reduction, turbo deactivation

Driver information
Warning light:
MY10 ECE:
- ECE emissions warning lamp: on
- ECE electronic engine power reduction: off
- CC message: on
MY10 US:
- US emissions warning lamp: on
- US electronic engine power reduction: on
- CC message: on
MY11 ECE:
- ECE emissions warning lamp: on'
-Electronic engine output reduction, ECE: on
- CC message: on

Service instruction
None