1C2002

1C2002 - P0524

Information saved in
DME

Fault code
1C2002 - P0524

Fault text
Oil pump, mechanical: oil pressure too low

Fault description
The diagnostic function monitors the oil pressure.

Condition for fault identification
Test condition:
The fault is recognized when the oil pressure rises beyond a
defined level in relation to oil temperature and engine speed.
Potential problem source(s):
- Mechanical defect in oil pump
Terminal condition: Terminal 15
Voltage condition:
- Onboard electrical system voltage between 9 V and 16 V
Temperature condition:
- Engine warmed to normal temp, above 80 °C
Time condition:
- None
Other conditions:
- Engine ON

Condition for fault memory entry
This fault is logged in the control module's fault memory
immediately.

Action in service
- Replace oil pump

Fault effect and breakdown warning
Breakdown notice:
- Engine damage possible. Switch off engine, continued
driving is not possible.
Possible apparent symptoms:
- none

Driver information
Warning light:
- ECE emissions warning lamp: off
- ECE electronic engine power reduction: off
- CC message: on
- US emissions warning lamp: off
- US electronic engine power reduction: off
- CC message: on

Service instruction
- none