72 12 004 Removing and Installing/Replacing Airbag Module For Driver's Knee Protection

72 12 004 - Removing and installing/replacing knee airbag module for driver protection





Warning!
Read and comply with safety regulations [1][2]Safety Precautions and General Information for handling airbag modules and pyrotechnical belt pretensioners.
Incorrect handling can activate airbag and cause injury.





Necessary preliminary tasks:
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead
- Remove lower trim from instrument panel





Unclip airbag module for driver protection from trim.

Installation Note:
Replace defective retainers.





Important!
Always replace airbag module for driver protection completely.
Do not carry out any repairs to the airbag module.