Fuel Pump Control Unit: Service and Repair

16 14 500 - Removing and installing or replacing control unit for electric fuel pump





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Remove lower section of right side trim panel Removing and Installing/Replacing Rear Left or Right Lower Side Trim Section





Disconnect plug connection (1).
Release nuts (2) and remove control unit (3).

Installation Note:
Tightening torque 16 14 2AZ 16 14 Fuel Pump.





Replacement:
- Carry out programming/coding Programming and Relearning