Body and Frame: Testing and Inspection

00 00 ... Underbody Incl. All Visible Components: Checking For Damage, Leaks, Corrosion

- Visually inspect underbody:

- For leaks (transmission, fuel system, brake components, steering)
- For correct routing of electrical leads (brake pad sensor, pulse generator)
- l For leaks (shock absorber) and mounting (springs)-rebound
- Damage to underbody
- Corrosion on underbody

Important:
If damage to the underbody is identified:

- If necessary, remove panels from underbody.
- Check mountings and fixtures and brake and fuel lines for damage and correct installation position.

Rectify identified faults after consulting with customer and issue a separate invoice.