66 20 520 Removing and Installing/Replacing an Ultrasonic Transducer at Front (Inside) (Park Distance Control)

66 20 520 - Removing and installing/replacing an ultrasonic transducer at front (inside) (Park Distance Control)





Necessary preliminary tasks:
- Remove front bumper trim.





Disconnect plug connection.
Unlock retaining tabs (1) in direction of arrow and pull ultrasonic transducer (2) out of holder (3).





Installation:
Retaining hooks (1) of ultrasonic transducer (2) must engage exactly in mountings (3).





Installation:
Make sure rubber ring (1) is correctly seated on ultrasonic transducer (2).