P152A

1B0A60 - P152A

Information saved in
DME

Fault code
1B0A60 - P152A

Fault text
Vehicle speed, plausibility: minimum speed under load not
reached

Fault description
The diagnostic function monitors the plausibility of the
speed signal.

Condition for fault identification
Test condition:
The fault is recognized when the vehicle speed deviates
from the calculated vehicle speed.
Potential problem source(s):
- Vehicle speed signal implausible
Terminal condition: none
Voltage condition:
- Onboard electrical system voltage between 9 V and 16 V
Temperature condition:
- Engine warmed to normal temp, above 80 °C
Time condition:
- None
Other conditions:
- Engine speed above 1800 rpm
- Left-to-right speed differential less than 10 km/h

Condition for fault memory entry
This fault is logged in the control module's fault memory
immediately.

Action in service
- Continue fault diagnosis with DSC

Fault effect and breakdown warning
Breakdown notice:
None
Possible apparent symptoms:
None

Driver information
Warning light:
ECE:
- ECE emissions warning lamp: off
- ECE electronic engine power reduction: off
- CC message: none
MY10 US:
- US emissions warning lamp: on
- US electronic engine power reduction: off
- CC message: on

Service instruction
None