CD9902

CD9902 - U1117

Information saved in
DME

Fault code
CD9902 - U1117

Fault text
Message (vehicle speed, 55.3.4) not current, receiver
DME/DDE, transmitter ICM

Fault description
The diagnostic function monitors the currency of the
message.

Condition for fault identification
Test condition:
The fault is recognized when the keep-alive counter has not
timed the message.
Potential problem source(s):
- Fault with transmitting control module
Terminal condition: Terminal 15
Voltage condition:
- Onboard electrical system voltage between 9 V and 16 V
Temperature condition:
- None
Time condition:
- None
Other conditions:
- none

Condition for fault memory entry
This fault is logged in the control module's fault memory
immediately.

Action in service
- Carry out system analysis.

Fault effect and breakdown warning
Breakdown notice:
None
Possible apparent symptoms:
None

Driver information
Warning light:
ECE:
- ECE emissions warning lamp: off
- ECE electronic engine power reduction: off
- CC message: none
MY10 US:
- US emissions warning lamp: on
- US electronic engine power reduction: off
- CC message: on

Service instruction
None