Engine Controls System: 213604

213604 - P160F

Information saved in
DME

Fault code
213604 - P160F

Fault text
Power management: Closed-circuit current fault

Fault description
The diagnostic function monitors the standby current draw.

Condition for fault identification
Test condition:
The fault is recognized when the discharge from excessively
high standby currents is higher than 1 Ah.
Potential problem source(s):
- Closed-circuit current too high
Terminal condition: none
Voltage condition:
- Onboard electrical system voltage between 9 V and 16 V
Temperature condition:
- None
Time condition:
- None
Other conditions:
- none

Condition for fault memory entry
This fault is logged in the control module's fault memory
immediately.

Action in service
- Conduct (ABL) energy diagnosis test module
- Conduct external standby current measurement

Fault effect and breakdown warning
Breakdown notice:
None
Possible apparent symptoms:
- Breakdown in extreme cases

Driver information
Warning light:
- ECE emissions warning lamp: off
- ECE electronic engine power reduction: off
- CC message: on
- US emissions warning lamp: off
- US electronic engine power reduction: off
- CC message: on

Service instruction
None