1C4119

1C4119 - P0195

Information saved in
DME

Fault code
1C4119 - P0195

Fault text
Engine-oil temperature sensor, electrical: malfunction

Fault description
The diagnostic function monitors the signal from the engine
oil temperature sensor for electrical malfunctions.

Condition for fault identification
Test condition:
The fault is recognized when the signal voltage exceeds 3.6
V.
Potential problem source(s):
- Defect in plugs or wiring harness between engine oil
temperature sensor and DME
- Defective engine oil temperature sensor
Terminal condition: Terminal 15
Voltage condition:
- Onboard electrical system voltage between 9 V and 16 V
Temperature condition:
- None
Time condition:
- None
Other conditions:
- none

Condition for fault memory entry
The diagnostic fault code is logged when the fault remains
present for longer than 2 min.

Action in service
- Check plugs and wiring harness between engine oil
temperature sensor and DME
- Replace engine oil temperature sensor

Fault effect and breakdown warning
Breakdown notice:
None
Possible apparent symptoms:
Adaptation (reduction) of engine oil service interval

Driver information
Warning light:
- ECE emissions warning lamp: off
- ECE electronic engine power reduction: off
- CC message: none
- US emissions warning lamp: off
- US electronic engine power reduction: off
- CC message: none

Service instruction
None