64 11 866 Removing and Installing/Replacing Servodrive For Blending Flap (Left)

64 11 866 - Removing and installing/replacing servodrive for blending flap (left)





Important!
Servomotors must be re-addressed in the event of replacement!
Addressing can only be carried out with the BMW diagnosis system.
Service functions:
- Body
- Heating and A/C function
- Flap motors
- Re-address flap motors





Necessary preliminary tasks:
- Remove trim panel for pedal assembly 51 45 185 Removing and Installing/Replacing Panel For Pedals.





Note:
For purposes of clarity, the following graphics show the heater/air conditioner removed.





Disconnect plug connection (1).
Release screws (2).
Remove servodrive at side.

Installation Note:
Do not twist teeth of servodrive.