P1076

2A40 - P1076

Information saved in
DME

Fault code
2A40 - P1076

Fault text
Valvetronic, thermal overload protection

Fault description
VVT-Overload Protection ECU-Temperature High Input
(Bank 1)

Condition for fault identification
Test condition:
Monitoring of maximum transistor temperature
Terminal condition: Terminal 15 ON
Voltage condition:
none

Condition for fault memory entry
0.03

Action in service
1. Repeat the diagnostic routine once the vehicle cools
2. If Item 1 is not OK, it will be necessary to proceed to an
examination of the control module's electronic circuitry

Fault effect and breakdown warning


Driver information
Warning light:
Emergency default mode 2

Service instruction
none