61 12 062 Replacing Wiring Harness For Front Bumper

61 12 062 - Replacing wiring harness for front bumper





Important!
Read and comply with notes on handling wiring harnesses 61 00 ... Notes on Handling Wiring Harnesses and Cables and cables.





Necessary preliminary tasks:
- Remove front bumper trim.





Unlock and disconnect plug connections (1) of all four ultrasonic transducers.
Unclip wiring harness (2) from bumper trim (3).
Remove wiring harness (2) from bumper trim (3).
Remove PDC.

Installation Note:
Make sure wiring harness (2) is laid correctly.