66 20 520 Removing and Installing/Replacing an Ultrasonic Transducer at Front (Inside) (Park Distance Control)

66 20 520 - Removing and installing/replacing a front ultrasonic transducer (middle)





Necessary preliminary tasks:
- Remove front bumper trim 51 11 156 Removing and Installing Front Bumper Trim





Note:
For purposes of clarity, illustration shows bumper removed.

Disconnect plug connection (1) and unclip ultrasonic transducer (2) from retaining lugs (3).

Installation:
Retaining lugs must not be damaged!
Make sure ultrasonic transducer (2) is securely seated.





Installation:
Make sure rubber ring (1) is correctly seated on ultrasonic transducer (2).