66 20 518 Removing and Installing/Replacing A Front Ultrasonic Sensor (Centre)

66 20 518 - Removing and installing/replacing a front ultrasonic transducer (side)





Necessary preliminary tasks:
- Remove front wheel arch cover 51 71 038 Removing and Installing/Replacing Front Left or Right Wheel Arch Cover (Front Section) in working area





Unfasten plug connection (1) and disconnect.
Unclip ultrasonic transducer (2) from retaining lugs.

Installation:
Retaining lugs must not be damaged!
Make sure ultrasonic transducer (2) is securely seated.





Installation:
Make sure rubber ring (1) is correctly seated on ultrasonic transducer (2).