33 32 681 Replacing One Rubber Mount In Lower Control Arm (Control Arm Removed)

33 32 681 - Replacing one rubber mount in lower control arm (control arm removed)





Special tools required:
- 33 3 351
- 33 3 352
- 33 3 353
- 33 3 354





Attach special tool 33 3 354 between both control arms.

Press rubber mount with special tools 33 3 351 and 33 3 352 out of lower control arm.





Attach special tool 33 3 354 between both control arms.

Press in new rubber mount (1) with special tools 33 3 351 and 33 3 353.





After installation:

- Perform chassis alignment check 32 00 155 KDS Chassis/Wheel Alignment Check With Ride Height Measurement Without Vehicle Load