54 37 024 Replacing Rear Roof Shell Seal

54 37 024 Replacing Rear Roof Shell Seal







Necessary preliminary tasks:
- Partially open soft top







Remove seal (1).

Installation:
Slide seal flush onto front roof shell seal.
Make sure seal (1) is securely mounted on seal carrier.







IMPORTANT: Count and make a note of washers.

Release left and right screws (1).

Installation:
Adjust gap dimension, seal carrier to roof shell.

= 2 mm ± 1 mm

If necessary, adapt number of washers.







Installation:
Grease contact points of seal carriers with Vaseline.
Slide seal carrier (1) fully onto front roof shell seal and screw down.
If necessary, adjust seal carrier, front roof shell.
Tightening torque 54 37 14AZ.







Detach seal (1) from seal carrier.

Installation:
Make sure seal (1) is correctly seated on seal carrier.







Check retraction depth of windows and adjust if necessary.