51 43 030 Removing and Installing/Replacing Cover on Front Left or Right Rollover Bar

51 43 030 Removing And Installing/Replacing Cover On Front Left Or Right Rollover Bar

Special tools required:







NOTE:
- Operations on right side analogous to left side shown. Use graphics in a mirror-inverted way.
- For purposes of clarity, operations show component removed.

Necessary preliminary tasks:
- Partially open folding roof
- If necessary, remove wind deflector







Insert special tool 00 9 327 in marked area from an angle at rear in direction of arrow A between front (1) and rear covers (2).
By rotating special tool in direction of arrow B, lever cover (1) out of retaining nipple of rear cover (2).







Repeat procedure, as described above.







Now carefully lever front cover (2) out of remaining retaining nipples by hand and remove cover (2).

Installation:
Replace missing or damages fixing grommets (1).







Installation:
Retaining nipples (1) on rear cover (2) must not be damaged. If necessary, replace rear cover (2).